MICROBES IN HUMAN WELFARE

IMPORTANT CONCEPTS AND DEFINNITIONS-

1. Fermentors – Production of beverages and antibiotics on an industrial scale, requires growing microbes in very large vessels called fermentors .

2. Antibiotics- Antibiotics are chemical substances, which are produced by some microbes and can kill or retard the growth of other (disease-causing) microbes.

3. Primary treatment : The treatment step of sewage for physical removal of particles – large and small – from the sewage through filtration and sedimentation , is called . Primary treatment .

4. Secondary treatment or Biological treatment : After primary treatment .the primary effluent is passed into large aeration tanks where it is constantly agitated mechanically and air is pumped associated with fungal filaments to form mesh like structures).

5. BOD (biochemical oxygen demand) -BOD refers to the amount of the oxygen that would be consumed if all the organic matter in one liter of water were oxidised by bacteria

6. Activated sludge- Once the BOD of sewage or waste water is reduced significantly, the
effluent is then passed into a settling tank where the bacterial ‘flocs’ are allowed to sediment.This sediment is called activated sludge.

7. Anaerobic sludge digesters- A small part of the activated sludge is pumped back into the
aeration tank to serve as the inoculum. The remaining major part of the sludge is pumped into large tanks called anaerobic sludge digesters.where anaerobica bacteria and the fungi digest the sludge.

8. Methanogens- Certain bacteria, which grow anaerobically on cellulosic material, produce large amount of methane along with CO2 and H2. These bacteria are collectively called methanogens,

9. Biocontrol refers to the use of biological methods (using biological agents for natural predation )for controlling plant diseases and pests , rather than using chemicals .

10. Biofertilisers- In agriculture Biofertilisers are organisms that enrich the nutrient quality of the soil.

11. Organic farming –Agriculture by using only biofertilisers is called organic farming because there are problems of pollution , associated with the overuse of chemical fertilizers. The main sources of biofertilisers are bacteria, fungi and cyanobacteria.

12. Mycorrhiza- Fungal symbiotic association with plants which helps plants to absorb phosphorus from soil , is called mycorrhiza. Many members of the genus Glomus form mycorrhiza..

13. Cyanobacteria -Cyanobacteria are autotrophic microbes widely distributed in aquatic and
terrestrial environments many of which can fix atmospheric nitrogen, e.g. Anabaena, Nostoc, Oscillatoria, etc



IMPORTANT DEFINITIONS, PRINCIPLES AND THEORY-



MICROBES IN HOUSEHOLD PRODUCTS-

Micro-organisms such as Lactobacillus and others commonly called lactic acid bacteria (LAB) grow in milk and convert it to curd. During growth, the LAB produce acids that coagulate and partially digest the milk proteins. A small amount of curd added to the fresh milk as inoculum or starter contain millions of LAB, which at suitable temperatures multiply, thus converting milk to curd, which also improves its nutritional quality by increasing vitamin B12. In our stomach too, the LAB play very beneficial role in checking diseasecausing microbes.
The dough, which is used for making foods such as dosa and idli is also fermented by bacteria. Similarly the dough, which is used for making bread, is fermented using baker’s yeast (Saccharomyces cerevisiae). A number of traditional drinks and foods are also made by fermentation by the microbes. ‘Toddy’, a traditional drink of some parts of southern India is made by fermenting sap from palms.
Microbes are also used to ferment fish, soyabean and bambooshoots to make foods. Cheese, is one of the oldest food items in which microbes were used. Different varieties of cheese are known by their characteristic texture, flavour and taste, the specificity coming from the microbes used. For example, the large holes in ‘Swiss cheese’ are due to production of a large amount of CO2 by a bacterium named Propionibacterium sharmanii. The ‘Roquefort cheese’ are ripened by growing a specific fungi on them, which gives them a particular flavour.

MICROBES IN INDUSTRIAL PRODUCTS-
Even in industry, microbes are used to synthesise a number of products valuable to human beings. Beverages and antibiotics are some examples. Production on an industrial scale, requires growing microbes in very large vessels called fermentors .

Fermented Beverages-
Microbes especially yeasts have been used from time immemorial for the production of beverages like wine, beer, whisky, brandy or rum. For this purpose the same yeast Saccharomyces cerevisiae used for bread-making and commonly called brewer’s yeast, is used for fermenting malted cereals and fruit juices, to produce ethanol. Depending on the type of the raw material used for fermentation and the type of processing (with or without distillation) different types of alcoholic drinks are obtained.
Wine and beer are produced without distillation whereas whisky, brandy and rum are produced
by distillation of the fermented broth.

Antibiotics-
Antibiotics produced by microbes are regarded as one of the most significant discoveries of the twentieth century and have greatly contributed towards the welfare of the human society. Anti is a Greek word that means ‘against’, and bio means ‘life’, together they mean ‘against life’ (in the context of disease causing organisms); whereas with reference to human beings, they are ‘pro life’ and not against. Antibiotics are chemical substances, which are produced by some microbes and can kill or retard the growth of other (disease-causing) microbes.
Alexander Fleming while working on Staphylococci bacteria, once observed a mould growing in one of his unwashed culture plates around which Staphylococci could not grow. He found out that it was due to a chemical produced by the mould and he named it Penicillin after the mould Penicillium notatum. However, its full potential as an effective antibiotic was established much later by Ernest Chain and Howard Florey. This antibiotic was extensively used to treat American soldiers wounded in World War II. Fleming, Chain and Florey were awarded the Nobel Prize in 1945, for this discovery.
Antibiotics have greatly improved our capacity to treat deadly diseases such as plague, whooping cough (kali khansi ), diphtheria (gal ghotu) and leprosy (kusht rog), which used to kill millions all over the globe. Today, we cannot imagine a world without antibiotics.

Chemicals, Enzymes and other Bioactive Molecules-
Microbes are also used for commercial and industrial production of certain chemicals like organic acids, alcohols and enzymes. Examples of acid producers are Aspergillus niger (a fungus) of citric acid, Acetobacter aceti (a bacterium) of acetic acid; Clostridium butylicum (a bacterium) of
butyric acid and Lactobacillus (a bacterium) of lactic acid.
Yeast (Saccharomyces cerevisiae) is used for commercial production of ethanol. Microbes are also used for production of enzymes. Lipases are used in detergent formulations and are helpful in removing oily stains from the laundry. You must have noticed that bottled fruit juices bought
from the market are clearer as compared to those made at home. This is because the bottled juices are clarified by the use of pectinases and proteases. Streptokinase produced by the bacterium Streptococcus and modified by genetic engineering is used as a ‘clot buster’ for removing clots from the blood vessels of patients who have undergone myocardial infraction leading to heart attack.
Another bioactive molecule, cyclosporin A, that is used as an immunosuppressive agent in organ-transplant patients, is produced by the fungus Trichoderma polysporum. Statins produced by the yeast Monascus purpureus have been commercialised as blood-cholesterol lowering agents. It acts by competitively inhibiting the enzyme responsible for synthesis of cholesterol.

MICROBES IN SEWAGE TREATMENT-
A major component of waste water is human excreta. This municipal waste-water is also called sewage. It contains large amounts of organic matter and microbes. Many of which are pathogenic.
This cannot be discharged into natural water bodies like rivers and streams directly .Before disposal, hence, sewage is treated in sewage treatment plants (STPs) to make it less polluting. Treatment of waste water is done by the heterotrophic microbes naturally present in the sewage. This treatment is carried out in two stages:

Primary treatment : These treatment steps basically involve physical removal of particles – large and small – from the sewage through filtration and sedimentation. These are removed in stages; initially, floating debris is removed by sequential filtration. Then the grit (soil and small pebbles) are removed by sedimentation. All solids that settle form the primary sludge, and the supernatant forms the effluent. The effluent from the primary settling tank is taken for secondary treatment.

Secondary treatment or Biological treatment : The primary effluent is passed into large aeration tanks ,where it is constantly agitated mechanically and air is pumped into it. This allows vigorous growth of useful aerobic microbes into flocs (masses of bacteria associated with fungal filaments to form mesh like structures). While growing, these microbes consume the major part of the organic matter in the effluent. This significantly reduces the BOD (biochemical oxygen demand) of the effluent. BOD refers to the amount of the oxygen that would be consumed if all the organic
matter in one liter of water were oxidised by bacteria. The sewagewater is treated till the BOD is reduced. The BOD test measures the rate of uptake of oxygen by micro-organisms in a sample of water and thus, indirectly, BOD is a measure of the organic matter present in the water. The greater the BOD of waste water, more is its polluting potential. Once the BOD of sewage or waste water is reduced significantly, the effluent is then passed into a settling tank where the bacterial ‘flocs’ are allowed to sediment. This sediment is called activated sludge. A small part of the activated sludge is pumped back into the aeration tank to serve as the inoculum.

The remaining major part of the sludge is pumped into large tanks called anaerobic sludge digesters. Here, other kinds of bacteria, which grow anaerobically, digest the bacteria and the fungi in the sludge. During this digestion, bacteria produce a mixture of gases such as methane, hydrogen sulphide and carbon dioxide. These gases form biogas and can be used as source of energy as it is inflammable.

The effluent from the secondary treatment plant is generally released into natural water bodies like rivers and streams. Due to increasing urbanisation, sewage is being produced in much larger quantities than ever before. However the number of sewage treatment plants has not increased enough to treat such large quantities. So the untreated sewage is often discharged directly into rivers leading to their pollution and increase in water-borne diseases. The Ministry of Environment and Forests has initiated Ganga Action Plan and Yamuna Action Plan to save these major rivers of our country from pollution. Under these plans, it is proposed to build a large number of sewage treatment plants so that only treated sewage may be discharged in the rivers.

MICROBES IN PRODUCTION OF BIOGAS-
Biogas is a mixture of gases (containing predominantly methane) produced by the microbial activity and which may be used as fuel. You have learnt that microbes produce different types of gaseous end-products during growth and metabolism. The type of the gas produced depends upon the microbes and the organic substrates they utilise. In the examples cited in relation to fermentation of dough, cheese making and production of beverages, the main gas produced was CO2.. However, certain bacteria, which grow anaerobically on cellulosic material, produce large amount of methane along with CO2 and H2. These bacteria are collectively called methanogens, and one such common bacterium is Methanobacterium.

These bacteria are commonly found in the anaerobic sludge during sewage treatment. These bacteria are also present in the rumen (a part of stomach) of cattle. A lot of cellulosic material present in the food of cattle is also present in the rumen. In rumen, these bacteria help in the breakdown of cellulose and play an important role in the nutrition ofcattle. Thus, the excreta (dung) of cattle, commonly called gobar, is rich in these bacteria. Dung can be used for generation of biogas, commonly called gobar gas.


A TYPICAL BIOGAS PLANT


The biogas plant consists of a concrete tank (10-15 feet deep) in which bio-wastes are collected and a slurry of dung is fed. A floating cover is placed over the slurry, which keeps on rising as the gas is produced in the tank due to the microbial activity. The biogas plant has an outlet, which is connected to a pipe to supply biogas to nearby houses. The spent slurry is removed through another outlet and may be used as fertiliser. Cattle dung is available in large quantities in rural areas where cattle are used for a variety of purposes. So biogas plants are more after build in rural areas. The biogas thus produced is used for cooking and lighting.
The technology of biogas production was developed in India mainly due to the efforts of Indian Agricultural Research Institute (IARI) and Khadi and Village Industries Commission (KVIC).

MICROBES AS BIOCONTROL AGENTS-

Biocontrol refers to the use of biological methods for controlling plant diseases and pests. In modern society, these problems have been tackled increasingly by the use of chemicals – by use of insecticides and pesticides.
These chemicals are toxic and extremely harmful, to human beings and animals alike, and have been polluting our environment (soil, ground water), fruits, vegetables and crop plants. Our soil is also polluted through our use of weedicides to remove weeds.

Biological control of pests and diseases: In agriculture, there is a method of controlling pests that relies on natural predation rather than introduced chemicals. A key belief of the organic farmer is that biodiversity furthers health. The more variety a landscape has, the more sustainable it is. The organic farmer, therefore, works to create a system where the insects that are sometimes called pests are not eradicated, but instead are kept at manageable levels by a complex system of checks and balances within a living and vibrant ecosystem.
Contrary to the ‘conventional’ farming practices which often use chemical methods to kill both useful and harmful life forms indiscriminately, this is a holistic approach that seeks to develop an understanding of the webs of interaction between the myriad of organisms that constitute the field fauna and flora.
The organic farmer holds the view that the eradication of the creatures that are often described as pests is not only possible, but also undesirable, for without them the beneficial predatory and parasitic insects which depend upon them as food or hosts would not be able to survive. Thus, the use of biocontrol measures will greatly reduce our dependence on toxic chemicals and pesticides.

An important part of the biological farming approach is to become familiar with the various life forms that inhabit the field, predators as well as pests, and also their life cycles, patterns of feeding and the habitats that they prefer. This will help develop appropriate means of biocontrol.

The very familiar beetle with red and black markings – the Ladybird, and Dragonflies are useful to get rid of aphids and mosquitoes, respectively. An example of microbial biocontrol agents that can be introduced in order to control butterfly caterpillars is the bacteria Bacillus thuringiensis (often written as Bt ). These are available in sachets as dried spores which are mixed with water and sprayed onto vulnerable plants such as brassicas and fruit trees, where these are eaten by the insect larvae. In the gut of the larvae, the toxin is released and the larvae get killed.

The bacterial disease will kill the caterpillars, but leave other insects unharmed. Because of the development of methods of genetic engineering in the last decade or so, the scientists have introduced B. thuringiensis toxin genes into plants. Such plants are resistant to attack by insect pests. Bt-cotton is one such example, which is being cultivated in some states of our country. You will learn more about this in chapter 12.

A biological control being developed for use in the treatment of plant disease is the fungus Trichoderma. Trichoderma species are free-living fungi that are very common in the root ecosystems. They are effective biocontrol agents of several plant pathogens.
Baculoviruses are pathogens that attack insects and other arthropods. The majority of baculoviruses used as biological control agents are in the genus Nucleopolyhedrovirus. These viruses are excellent candidates for species-specific, narrow spectrum insecticidal applications. They have been shown to have no negative impacts on plants, mammals, birds, fish or even on non-target insects. This is especially desirable when beneficial insects are being conserved to aid in an overall integrated pest management (IPM) programme, or when an ecologically sensitive area isbeing treated.

MICROBES AS BIOFERTILISERS-
The use of the chemical fertilisers to meet the ever-increasing demand of agricultural produce has contributed significantly to this pollution. Of course, we have now realised that there are problems associated with the overuse of chemical fertilisers and there is a large pressure to switch to organic farming – to use of biofertilisers.
Biofertilisers are organisms that enrich the nutrient quality of the soil. The main sources of biofertilisers are bacteria, fungi and cyanobacteria. The nodules on the roots of leguminous plants formed by the symbiotic association of Rhizobium. These bacteria fix atmospheric nitrogen into organic forms, which is used by the plant as nutrient. Other bacteria can fix atmospheric nitrogen while free-living in the soil (examples Azospirillum and Azotobacter), thus enriching the nitrogen content of the soil.
Fungi are also known to form symbiotic associations with plants (mycorrhiza). Many members of the genus Glomus form mycorrhiza. The fungal symbiont in these associations absorbs phosphorus from soil and passes it to the plant. Plants having such associations show other benefits also, such as resistance to root-borne pathogens, tolerance to salinity and drought, and an overall increase in plant growth and development.
Cyanobacteria are autotrophic microbes widely distributed in aquatic and terrestrial environments many of which can fix atmospheric nitrogen, e.g. Anabaena, Nostoc, Oscillatoria, etc. In paddy fields, cyanobacteria serve as an important biofertiliser. Blue green algae also add organic matter to the soil and increase its fertility. Currently, in our country, a number of biofertilisers are available commercially in the market and farmers use these regularly in their fields to replenish soil nutrients and to reduce dependence on chemical fertilisers.

Corbon monoxide

Carbon monoxide-
Carbon monoxide is a colorless, odorless, tasteless, and toxic gas produced as a by-product of combustion. Any fuel burning appliance, vehicle, tool or other device has the potential to produce dangerous levels of carbon monoxide gas.Carbon monoxide inhibits the blood's ability to carry oxygen to body tissues including vital organs such as the heart and brain. When CO is inhaled, it combines with the oxygen carrying hemoglobin of the blood to form carboxyhemoglobin (COHb). Once combined with the hemoglobin, that hemoglobin is no longer available for transporting oxygen.The symptoms from exposure to carbon monoxide vary widely based on exposure level, duration, and the general health and age on an individual. A common complaint that is most significant in the recognition of carbon monoxide poisoning is headache with dizziness and nausea.

Flower Structure and Reproduction
Flowers are the plant's reproductive structures. Angiosperms are types of plants that bear fruits and flowers. Flowers are usually both male and female, and are brightly colored to attract insects to help them carry pollen used for sexual reproduction. Not all flowers are colorful, though. These flowers usually use the wind for pollination.
Parts of the Flower
The receptacle is the part of the branch on which a flower forms. Color the receptacle (B) brown. Sepals are leaf like structures that surround and protect the flower before it blooms. Color the sepals (C) green. Petals are the colorful part of the flower that attracts insects and even other small animals, such as mice, birds, and bats. Color the petals (D) a bright color of your choice. All flowering plants have flowers, but some are not brightly colored. The petals of these flowers are reduced or absent and the plant relies on the wind or water for pollination.
The flower has both male and female reproductive parts. The female reproductive structures are called carpels. In most flowers, the carpels are fused together to form a pistil. Color the pistil (P) pink. The pistil has three parts, which can be seen, in the box labeled "pistil". The stigma at the top is often sticky and is where the pollen attaches. Color the stigma (J) purple. The style is the long tube that attaches the stigma to the ovary. Sperm from the pollen will travel down this tube to the ovules. The ovules, or eggs, are stored in the ovary until they are fertilized. Plants can only fertilize eggs of the same species. Special chemicals prevent sperm from fertilizing the eggs of flowers that are not the same kind. Color the style (K) red, and the ovary (L) pink. Color the ovules (O) black.
The male reproductive structures are called the stamens. Color the stamens (H) blue. Each stamen consists of an anther (A), which produces pollen, and a filament (F), which supports the anther. In the box labeled "stamen" color the anther dark blue, and the filament light blue. Pollen produced by the anther is carried by insects or other animals to the pistil of another flower where it may fertilize the eggs.
The other flowers in the picture follow the same plan, although they come in many different colors and styles. Color each of the flowers according to the colors above (blue for stamen, pink for pistil, bright colors for the petals. etc.). Note that in some of the flowers, not all the structures are visible.
Plant Reproduction
Sexual reproduction in plants occurs when the pollen from an anther is transferred to the stigma. Plants can fertilize themselves: called self-fertilization. Self-fertilization occurs when the pollen from an anther fertilizes the eggs on the same flower. Cross-fertilization occurs when the pollen is transferred to the stigma of an entirely different plant.
When the ovules are fertilized, they will develop into seeds. The petals of the flower fall off leaving only the ovary behind, which will develop into a fruit. There are many different kinds of fruits, including apples and oranges and peaches. A fruit is any structure that encloses and protects a seed, so fruits are also "helicopters" and acorns, and bean pods. When you eat a fruit, you are actually eating the ovary of the flower.
1. What is an angiosperm?
2. The flower attaches to what part of the plant?
3. Why are flowers brightly colored?
4. Name two mammals that might pollinate a plant.
5. If the petals of a flower are reduced or absent, how is the plant pollinated?
6. The female reproductive structures are called the:
7. Name the three parts of the pistil:
8. Where are the ovules stored?
9. Name the two parts of the stamen:
10. Describe sexual reproduction in plants.
11. The ovary develops into what structure?
12. Define fruit.
13. Some flowers are not brightly colored at all, but have a very pungent odor that smells like rotting meat. How do you think these flowers are pollinated?
14. In many flowers, the pistils and stamens reach maturity at different times. Considering what you know about pollination, why would this be an advantage to the plant?